• Disponible con 1 "Flaretek o 1" conexiones de líquido de brida ANSI
• Flujo máximo hasta 35.0 galones / minuto
• Usuario final mantenible
• Autocebante
• Diseño probado en el campo
• Sala limpia fabricada, DI agua probada,
• Purga con nitrógeno, y doble bolsa
• Válvulas de retención de bola o planas disponibles
• Amortiguadores para bombas de PTFE serie F

Pump Material

• Casing: PTFE
• Manifold: PTFE
• Body (non-wetted): High-Density Polyethylene

Check Valve: Ball or Check Valves available.

Flat check valve is recommended for increased flow (up to 5%) and suction lift applications. Ball check valve is recommended for flooded suction or viscous liquids.

Discharge Volume/Cycle: 0.185 gal (700 cc)

Maximum Cycles/Minute: 150

Port Dimensions

• Liquid Inlet & Discharge: 1" Flaretek or 1" ANSI flange 150#
• Air Inlet: Female 1/2" NPT
• Air Exhaust (with muffler): Female 3/4" NPT

Air Supply Pressure: 20 to 100 PSI (1.4 to 7 kgf/cm2)

Maximum Liquid Temperature: 212° F (100°C)

Net Weight: Flaretek 111.6 lbs. (50.6 kg)

Flange: 114.6 lbs. (52.0 kg)